Protrudent/Bumpy Paper - Fuji Xerox DocuPrint P105 b User Manual

Protrudent/Bumpy Paper

Problem
Printed surface got
protrudent/bumpy.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Action
Clean up the fusing unit.
1 Load one sheet of paper on the multipurpose feeder (MPF), and
then print a solid image all over paper.
2 Load the printed sheet with the side to be printed on facing down,
and then print a blank sheet of paper.
Troubleshooting 124