Ch" Operating Mode - Configuring Channels; Overview Of The "Ch" Menu - Sennheiser SKM 9000 Instruction Manual

Using the EM 9046
"ch" operating mode – Configuring channels
In "ch" operating mode, you can configure channels. Some of the settings
that can be made can be synchronized via infra-red between the receiver
and the transmitters. These settings are marked with a
column (see also next page).
In "ch" operating mode, you can also select channels for the headphone
monitoring. To do so, proceed as described on page 74.

Overview of the "ch" menu

Main menu "Channel setup"
Frequency
Name
CMD mode
CH standby
Encryption
RF level rec
Transmitter
setup
Extended menu "Transmitter setup"
Channel
setup
Rf mode
Gain
Low cut
Display
Lock
AF source
Cable
Selects a frequency preset or
sets the frequency manually
Enters a channel name
Configures audio and
command outputs
Mutes the channels
Binds the audio signal to the
receiver and protects against
eavesdropping
Records the antenna signals
and the diversity evaluation
Calls up the extended menu
"Transmitter setup"
Calls up the main menu
"Channel setup"
Adjusts the transmission
mode
Adjusts the transmitter's
input gain
Sets the transmitter's
low-cut filter
Selects the transmitter's
standard display
Activates/deactivates the
transmitter's lock mode
Displays the microphone head
(SKM)/audio source and cable
emulation (SK)
Emulates different instrument
cable lengths (SK)
in the
Page
67
68
68
69
70
70
––
Page
–
72
72
72
73
73
73
73
Digital 9000 | 65