Preparing The L 60 Charger For Use; Cascading Several Chargers; Setting Up Or Mounting The Charger - Sennheiser SKM 9000 Instruction Manual

Preparing the Digital 9000 system for use

Preparing the L 60 charger for use

Cascading several chargers

Up to 4 L 60 charger can be cascaded together and can be powered by the
NT 3-1 mains unit.
Prepare the L 60 chargers:
– Make sure that the chargers are
– Unscrew the two screws
– Tilt the charger to the side and slide out the rails
– Tighten the two screws 6.
7
6
5
Unscrew the two screws
Slide the second charger onto the rails
tighten the two screws 7.
Repeat for the other chargers.

Setting up or mounting the charger

CAUTION!
Risk of staining of surfaces!
Surfaces can be treated with varnish, polish or synthetics which might
cause stains when they come into contact with other materials. Despite
a thorough testing of the materials used by us, we cannot rule out the pos-
sibility of staining.
Do not place the L 60 charger on delicate surfaces.
disconnected from the mains.
6
at the bottom of one charger.
5
7
at the bottom of a second charger.
5
of the first charger and
Digital 9000
completely.
| 41