Download Print this page

Timer Operation; Operation Mode - Haier HDU-42CF03/H Operating & Installation Manual

Haier duct type air conditioner operation & installation manual indoor unit
Hide thumbs

Advertisement

Operation

TIMER operation

Set Clock correctly before starting Timer operation.
You can let unit start or stop automatically at following time: Before you wake up in the
morning, or get back from outside or after you fall asleep at night.
TIMER ON/OFF
(1)After unit start, select your desired

operation mode.

Operation mode will be displayed on LCD.
Power indicator lights up.
(2)TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes
as follows:
ON
OFF
Select your desired TIMER mode (ON or OFF)
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
Hints
Wire controller possesses memory function, when use TIMER mode next time, just
press SET button after mode selecting if timer setting is the same as previous one.
ON
blank
OFF
(3)Timer setting
Every time the button is pressed, time increases 10min.
If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 10min.
If button is kept depressed, time will change quickly.
Time will be shown on LCD. It can be adjusted within
24hours.
(4)Confirming your setting
After setting correct time, press SET button to confirm
"ON" or "OFF" stops flashing.
Time displayed: Unit starts or stops at x hour x min (ON
or OFF).
Timer mode indicator lights up.
11

Advertisement

loading

  Also See for Haier HDU-42CF03/H

  Related Manuals for Haier HDU-42CF03/H

This manual is also suitable for:

Hdu-42hf03/hHdu-42cf03Hdu-42hf03