Weider Wedier Pro 9635 User Manual page 19

38. Orient the Front Backrest (41) as shown.
Attach the Backrest to the Front Upright (42)
with two M6 x 63mm Screws (43) and two M6
Washers (10).
39. Insert an M6 x 50mm Carriage Bolt (38)
through the center hole in the Seat Plate (37).
Attach the Seat Plate to the Seat (13) with
two M6 x 16mm Screws (18).
Insert the M6 x 50mm Carriage Bolt (38)
through the indicated hole in the Front Seat
Frame (36). Tighten an M6 Nylon Locknut (2)
with an M6 Washer (10) onto the Carriage
Bolt.
Attach the other end of the Seat (13) to the
Front Seat Frame (36) with an M6 Washer
(10) and an M6 x 50mm Screw (81).
40. Lubricate the M8 x 57mm Bolt (33). Attach the
Leg Lever (29) to the Front Seat Frame (36)
with the Bolt and an M8 Nylon Locknut (3).
Do not overtighten the Locknut; the Leg
Lever must be able to pivot easily.
Insert the Eyebolt (35) into the Leg Lever (29)
from the direction shown. Tighten an M10
Nylon Locknut (21) with an M10 Washer (9)
onto the Eyebolt.
41. Rest the Front Seat Frame (36) on the indi-
cated pin in the Front Upright (42). Attach the
Front Seat Frame to the Front Upright with an
M8 x 70mm Carriage Bolt (14) and the Seat
Knob (40).
38
43
39
81
40
41
14
Pin
19
42
41
10
Thick
End
13
38
37
18
36
10
2
36
3
33
29
9
35
21
42
40
36