Haier AS072XVERA Operation And Installation Manual page 15

Operation
Note: For cooling only type, this function is invalid.
A
TEMP
ON
OFF
FAN
HEALTH
1
5
MODE HEALTH AIRFLOW
SLEEP FRESH
SWING
CLOCK SET
TIMER
STERILIZE
LIGHT LOCK
RESET CODE
Press ON/OFF button
1
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
2
changes as follows:
AUTO COOL
Select Heating operation "
operation starts.
Select temp. button
3
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or
decrease quickly.
Press FAN button. For each press, fan speed changes as
4
follows:
LOW
In heat mode,warm air will blow out after a short period of
time due to cold-draft prevention function.
Press ON/OFF button
5
Unit stops running, and when entering this mode for the next
time, it will show the previous setting.
13
DRY FAN HEAT
" appears and Heating
MID HIGH AUTO
Heating