Haier AS072XVERA Operation And Installation Manual page 14

Operation
A
TEMP
ON
OFF
FAN
HEALTH
1
4
MODE HEALTH AIRFLOW
FRESH
SLEEP SWING
SET
CLOCK
TIMER
STERILIZE
RESET CODE LIGHT LOCK
Press ON/OFF button
1
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
2
changes as follows:
Remote
controller
Select Fan operation shows "
3 Press FAN button. For each press, fan speed changes as
follows:
LOW
Unit runs at the speed displayed on LCD.
Press ON/OFF button
4
Unit stops running, and when entering this mode for the
next time, it will show the previous setting.
Note:
In this mode, temp. can't be selected, temp.setting will not be
shown in LCD display.In Fan operation mode, "AUTO" fan
speed is not available. Operation cycles are as follows:
LOW
12
AUTO COOL DRY FAN
", Fan operation starts.
MID HIGH
MID HIGH
Fan
HEAT