Table of Contents
Advertisement
Operation
Manual Operation
Control panel
Remote controller
ON
TEMP
ON
OFF
FAN
HEALTH
MODE
SLEEP
SWING
CLOCK
SET
TIMER
HEAT
LIGHT
LOCK
RESET
5.Timer setting for TIMER OFF
Press time buttons
6.Time confirming for TIMER OFF
After time setting, press SET button to confirm time.
The control panel will display TIMER.
7.Canel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the time setting sequence of TIMER ON and TIMER OFF, either start-stops or
stops-start can be realized.
If the time setting of TIMER ON is the same as TIMER OFF, TIMER ON-OFF function cannot
be set.
MODE
ON/OFF
Set clock correctly before starting TIMER operation
1.Unit start
After unit start, select your desired operation mode (operation
mode will be displayed on LCD)
2.TIMER mode selection
Press TIMER button on the remote controller to change TIMER
mode. Every time the button is pressed, display of TIMER mode
changes as follows:
ON
12:00
AM
TIMER ON TIMER OFF
Then select TIMER ON-OFF mode.
3.Time setting for TIMER ON
Press time button
Every time the button is pressed, time increases 10 minuts.
If the button is kept pressed, time will changes quickly.
Every time the button is pressed, time decreases 10 minuts.
If the button is kept pressed ,time will changes quickly.
It can be adjusted within 24 hours at will.
AM refers to morning and PM refers to afternoon.
4.Timer confirming for TIMER ON
After setting correct time, press TIMER button to confirm time.
Now
stops to flash, while
ON
and follow the same procedures in " Time setting for TIMER ON"
Timer ON-OFF Function
FAN
TIMER
TEMP
OFF
ON
12:00
12:00
AM
PM
TIMER ON-OFF
OFF
stops to flash.
OFF
11
TEMP+
TEMP-
HEALTH
blank
OFF
12:00
PM
will flash.
ON
starts flashing.
Advertisement
Table of Contents
