Sleep Function; Operation Mode - Haier AP482AKEAA Operation And Installation Manual

Cabinet type air conditioner
Hide thumbs Also See for AP482AKEAA:
Table of Contents

Advertisement

Operation
Control panel
Use of SLEEP function
Before using this function, the clock must be set.
After the unit's start, set running mode and then press SLEEP button once to make the air conditioner
have the previous-set sleep time (first power-on is "1h"). The sleep symbol will appear. Press time
button
/
: you can choose the time in 1~8 hours. Each time the button is pressed, the time
increases/decreases 1 hour: "xh" and "OFF" indications appear on the display.
The control panel will display "SLEEP" ON LCD when
SLEEP function set.

Operation Mode

1.In COOL, DRY mode
One hour after sleeping operation start, the
temperature
is 1 C higher than the setting one. After another
hour, temperature rises 1 C: sleep run continuously
for another 6 hours and then stops. The actual
temperature is higher than the setting one which
is to prevent from being too cold to your sleep.
2.In HEAT mode
One hour after sleeping operation start, the
temperature
is 2 C lower than the setting one. After another
hour, temperature decreases by 2 C more.
Temperature will automatically rise by 1 C after
another 3 hours' continuous operation. The actual
temperature is lower than the setting one which
is to prevent from being too hot to your sleep.
3.In AUTO mode.
The air conditioner will run in corresponding sleep
operation according to the automatically selected
operation mode.
Notes:
After setting SLEEP function, it is not possible to set clock.
If set-sleep time does not reach 8 hours, unit will automatically stop
operation after set time is reached.
Set " TIMER ON " or " TIMER OFF "In COOL,DRY mode function first,
then set SLEEP. After set SLEEP function, the TIMER function cannot
be set.
MODE
FAN
ON/OFF
9
TEMP
SLEEP
SLEEP RUN BEGINS
about 6 hrs
increase 1 C
1 hrs
SETTING T
In COOL,DRY mode
SETTING T
1 hrs
decrease 2 C
1 hrs
3 hrs
SLEEP RUN BEGINS
In HEAT mode
Remote controller

Sleep Function

TEMP+
TEMP-
HEALTH
SLEEP RUN STOPS
increase 1 C
SHUT DOWN
SHUT DOWN
decrease 2 C
about 6 hrs
increase 1 C
SLEEP RUN STOPS
TEMP
ON
OFF
FAN
HEALTH
MODE
SLEEP
SWING
CLOCK
SET
TIMER
HEAT
RESET
LIGHT
LOCK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap602akeaa

Table of Contents