Assembly - Weslo Pursuit 6.0 Dx Bike User Manual

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver , two adjustable
wrenches , and pliers .
Use the drawings below to identify the small parts used for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in
the parts bag, check to see if it has been preassembled.
M8 Washer
M6 Washer M8 Split
M8 Nylon
M6 Nylon
(14)–4
(61)–8 Washer (42)–4
Locknut (10)–2
Locknut (63)–4
M10 Nylon
M4 x 5mm
M4 x 8mm M4 x 12mm M4 x 16mm
Locknut (33)–4
Screw (65)–2
Screw (64)–2 Screw (25)–1 Screw (49)–4
M6 x 30mm Screw M8 x 15mm
M6 x 30mm Bolt
(62)–4 (60)–8 Screw (34)–4
M8 x 115mm Bolt (57)–2
M10 x 65mm Carriage Bolt (30)–4
4