Advertisement
Advertisement
Table of Contents
Related Manuals for Rabbit Air BioGP SPA-421A
Summary of Contents for Rabbit Air BioGP SPA-421A
- Page 1 Rabbit Air User's Guide www.RabbitAir.com Model No. SPA-421A and SPA-582A...
-
Page 2: Safety Instructions
• Any attempts to open or repair the BioGP air purifier without written permission from Rabbit Air will void the warranty and could cause serious personal injury to the user and/or result in severe damage to the unit. •... -
Page 3: Remote Control Limitations
Cautions Concering the Operation of BioGP Air Purifier • Do not block the intake and air outlet. • Do not use the unit near or on hot objects such as a stove. • Do not use the unit where it may come into contact with steam. •... -
Page 4: Part Names
Part Names Main Unit Display Front View of Air Purifier Indicator lights and main control button for the air cleaner. Filter Reset Button Air Outlet After replacing or cleaning the filters, press the filter reset button to reset the indicators. Odor/Chemical Sensor Detects odor such as Dust/Particle Sensor... -
Page 5: Main Unit Display
10 minutes 1 hours 2 hours Fan Level Button Rabbit Air off timer 4 hours The fan speed can be switched between Low, Medium, The indicator light shows the remaining time. High and Turbo. -
Page 6: Filter Installation
Filter Washable charcoal based activated Nano-silver carbon filter Rabbit Air Pre-Filter 1. Filter Installation To maintain the quality of the filters, they are placed in the unit within plastic bags. CAUTION Please remove the filters from the plastic bags before using the unit. - Page 7 How to set up Home Air Quality Baseline. When the power plug is inserted into the wall outlet, the unit will register the current home air quality as a baseline (reference point). It will take 15 seconds for the Air Quality Level Sensors to indicate the air quality level. You will see the unit status indicator on the main unit display flashing for 15 seconds.
- Page 8 High Turbo Mode of Operation Rabbit Air ATTENTION When the air is heavily polluted at the time the power plug is inserted, the unit may not work properly in auto mode because the baseline or reference point is too high. To reset the air quality baseline, unplug the unit and re-insert it when the air quality is in normal condition.
- Page 9 Scientific research shows negative ions may help to Pollen Mode alleviate depression, relieve stress, and boost our daytime energy. The Rabbit Air BioGP air purifier uses non-ozone Mode of clusters to produce negative ions, therefore, our unit has zero ozone emission and it is harmless to human and the Operation environment.
-
Page 10: Cleaning And Maintenance
Main Unit Control Button You can control the air purifier by the main unit control button. When you press the button, the operation mode of the air purifier will be changed according to the following diagram. Auto Mode Low Speed Medium Speed High Speed Turbo Speed... - Page 11 If your pre-filter appears to have dirt that has not been removed by vacuuming, please follow the steps below to wash the pre-filter. Remove the pre-filter from the unit. (Fig. 3) Fill the sink with lukewarm water and gently wash the filter under the water for 2-3 minutes or until it is completely clean.
- Page 12 For more information on the BioGP HEPA filter replacement or to buy replacement filter, please contact Rabbit Air. Replacing the washable activated carbon filter Replacement indicator light will come on every 18 months, the washable activated carbon filter only need to be replaced every other time when the indicator light comes on.
-
Page 13: Limited Warranty
The Limited Warranty does not cover replacement filters. In the event of a malfunction or failure of your Rabbit Air BioGP Air Purifier, please contact Rabbit Air to obtain a return authorization number and the address of the service center. The return authorization number must be clearly written on the outside of the shipping box or the shipment may be refused. -
Page 14: Troubleshooting
Troubleshooting Before calling for repair, please review the list below. The problem may not be due to unit malfunction. Symptom Solution Check if power plug is loose. Unit does not operate. Press the main unit control button or any buttons on the remote The remote control does Check if the battery has been depleted. - Page 15 Reduce Smoking Odors in House Reduce Pet Odors Reduce Cooking Odors Other Name of store where purchased: Where do you plan to use this Rabbit Air product? (Check all that apply) Living Room Office Do you own a house or rent?
- Page 16 Postage Required Post Office will not deliver without proper postage. Rabbit Air 201 West Garvey Ave., Suite 102-168 Monterey Park CA 91754-7418 WARRANTY REGISTRATION FOR Ultra Quiet Air Purifier RETURN THIS CARD NOW FOR: Product Protection With the information you provide we can confirm the date of purchase of your product.