Page 16
Keep the Rabbit Air purifier away from water at all times. • Do not use the Rabbit Air purifier near fireplaces or in areas where flammable or combustible products or vapors may be present. • This appliance is not intended for use by persons (including children) with...
• Do not use the Rabbit Air purifier on or around hot surfaces. • Unplug the Rabbit Air purifier from the power outlet when not in use and before • Do not use the Rabbit Air purifier in a room where it may come into contact with servicing or cleaning the unit.
Meet your MinusA2 Back view Handle Front view Power Cord Mood Light Bracket Holder Air Outlet Air Intake (Around all sides of front panel) Control Panel/ Display Panel Remote control Particle Sensor Power 電源 Power Speed Light Sensor 風量 Speed Mode 運転切替...
Page 20
Let’s Begin - Initial Set Up Meet the Filters The MinusA2 Air Purifier is designed for residential use only. To maintain the quality of the filters, they are packaged in plastic. Please remove the filters from the plastic wrapping before using the unit. Your customized filter will be packaged in plastic outside of the unit.
Page 21
7. Pull out the Activated 8. Return the filters to the filter case in the Finishing up! Carbon Filter and discard following order from back to front: plastic wrapping. Activated Carbon Filter, Customized Filter, BioGS HEPA Filter, Medium Filter, Pre-Filter. 6.
Mode Selection Operation Modes (Pollen Mode or Auto Mode) Plug the unit into a 100V outlet. Auto Mode Plug the unit into a 100V outlet. 花粉 After turning on the unit, briefly press 自動 the Mode/Filter Reset button to select Press the power button.
Page 23
Mood Light Operation Changing the Sensitivity Level of the Sensors Mood Light not only changes colors, but it also indicates the current operation mode. Mood Light Button You can adjust the sensitivity level of the air quality sensors. The sensors come preset at a standard sensitivity level as a default.
Cleaning the Unit Surface Cleaning and Maintenance The unit surface should be cleaned depending Always unplug the unit before cleaning. on the air quality of the room. outlet air inlet Cleaning the Particle Sensor Clean particle sensor every three to six months. Clean the air inlet and outlet using a vacuum 1.
Page 25
Filter Cleaning and Replacing the BioGS HEPA Filter every 12 months Replacement Schedule* Discard the old HEPA Filter, do not reuse. 1. Remove old HEPA Filter and discard. Filters Replacement Cleaning 2. Remove new filter from plastic wrapping. 3. Place new HEPA Filter in filter case. Every Month Washable Pre-Filter...
Page 26
Do not attempt to install the mounting bracket if there are missing or defective parts. Contact Rabbit Air and replacement parts will be shipped to you immediately. Rabbit Air is not liable for damage or injury caused by incorrect mounting, incorrect assembly or incorrect usage.
Below we’ve provided you with a troubleshooting guide for your MinusA2 air purifier. You are welcome to call us anytime with questions or concerns at Troubleshooting Guide 0120-152-952 -The Rabbit Air team Symptom Suggestions Symptom Suggestions The unit does not respond to smoke or •...
Limited Warranty “ Rabbit Air warrants that your air purifier (“Product”) will be free from defects in material or workmanship for a period of five (5) years from the date of purchase. To activate the warranty, please complete the warranty registration form online at www.rabbitair.co.jp/warranty within 90 days of your air purifier purchase.