Rabbit Air SPA-550A Owner's Manual
Ultra quiet
Hide thumbs
Also See for SPA-550A:
- Owner's manual (14 pages) ,
- Owner's manual (13 pages) ,
- Owner's manual (13 pages)
Related Manuals for Rabbit Air SPA-550A
Summary of Contents for Rabbit Air SPA-550A
- Page 1 Ultra Quiet Air Purifier Hello! Owner’s manual Models: SPA-550A SPA-625A For Questions: Call 888.866.8862 24/7 customer care Visit us at www.rabbitair.com Copyright © Rabbit Air 2016. All rights reserved BIOGS2UM1603...
- Page 2 ” • Do not use the Rabbit Air purifier near fireplaces or in areas where flammable or combustible products or vapors may be present. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet...
-
Page 3: Electrical Safety Instructions
• Do not use the Rabbit Air purifier on or around hot surfaces. • Unplug the Rabbit Air purifier from the power outlet when not in use and • Do not use the Rabbit Air purifier in a room where it may come into contact before servicing or cleaning the unit. -
Page 4: Front View
Front view Control button / User interface Meet your BioGS 2.0 Top view Remote holder Air outlet Air intake Back view Remote holder Handle Air quality sensor (Includes odor and particle sensors) Air intake Power cord... -
Page 5: Remote Control
User Interface Device Control - Section 1 Device Control (Section 1) Main Control Button The control button light will appear when the BioGS is operating. Tap this button to power on the unit. Tap it again to cycle through different fan speeds and auto modes. Filter Status Device Settings Press and hold to power off... - Page 6 • Air Quality Indicator Device Settings - Section 2 When the air purifier is in Auto Mode, the Air Quality Indicator will continually monitor the odor and particle levels in the air, the user interface will light up briefly each time the pollution level changes.
- Page 7 Filter Status - Section 3 • Filter Maintenance & Replacement Light The Filter Maintenance and Replacement Light will illuminate when your air purifier needs attention. Solid light = It’s time to clean the filters. Flashing light = It’s time to replace the filters. •...
- Page 8 Meet the Filters BioGS HEPA Filter Charcoal-Based Pre-Filter Activated Carbon Filter Front Panel...
- Page 9 4. Remove the HEPA Filter and discard its plastic wrapping. Let’s begin - Initial setup The BioGS Air Purifier is designed for residential use only. To maintain the quality of the filters, they are packaged in plastic. Please remove the filters from the plastic bags before using the unit. 1.
-
Page 10: Cleaning And Maintenance
Cleaning the Pre-Filter Cleaning and Maintenance The Pre-Filter should be cleaned according to the level of pollution in the air of the room. Cleaning the Air Quality Sensor dust outlet (Includes particle and odor sensors) Clean the air quality sensor every six months or as needed. -
Page 11: Replacing The Activated Carbon Filter
Filter Cleaning and Replacement Schedule* Replacing the Activated Carbon Filter Every 18 months Discard the old Activated Carbon Filter. This filter cannot be reused. The lifespan of the filters is estimated based on normal residential use. 1. Pull out the old Activated Carbon Filter Filters Filter Life Cleaning... -
Page 12: Limited Warranty
Limited Warranty “ Rabbit Air warrants that your air purifier (“Product”) will be free from defects in material or workmanship for a period of five (5) years from the date of purchase. To activate the warranty, please complete the warranty registration form online at www.rabbi- tair.com/warranty within 90 days of your air purifier purchase.
Need help?
Do you have a question about the SPA-550A and is the answer not in the manual?
Questions and answers