Rabbit Air BioGP SPA-421A User Manual page 7

How to set up Home Air Quality Baseline.
When the power plug is inserted into the wall outlet, the unit will register the current home air quality as a baseline (reference point).
It will take 15 seconds for the Air Quality Level Sensors to indicate the air quality level. You will see the unit status indicator on the
main unit display flashing for 15 seconds.
The Air Quality Level Indicator displays a color-coded indicator light depending on relative changes to the environment from the
time the power plug is inserted into the wall outlet and thereafter.
The Air Quality Level Indicator can be turned off using the Standby button on the remote control.
Important
When the air is heavily polluted at the time the power plug is inserted, the unit may not work properly in auto mode because
the baseline or reference point is too high. To reset the air quality baseline, unplug the unit and re-insert it when the air
quality is in normal condition.
Operation
Unit can operate by using either:
1. Remote Control
2. Main Unit Control Button.
The remote control or main unit control button can activate the following modes.
1 Automatic mode
Silent mode
2
3 Manual mode
Start operation.
Auto mode
1
Turbo mode
2
Silent mode
3
Manual mode
4
Pollen mode
5
Timer mode
6
Negative Ion mode
7
Remote control operation
Activate remote control by pressing the any button. Be inline with the front side of the
unit. (The maximum range of effectiveness is 23 feet)
Avoid exposure to direct sunlight; inverter lamp and high frequency equipment. It might
affect performance of remote control.
If air purifier responds properly, a short beep will sound and operation will start.
Please try to replace the battery if the remote control does not work properly.
(Some features will not be available by using just the unit control button.)
Remote Main
Unit automatically select fan speed based on air quality.
Unit operates at turbo speed for 10 minutes and then returns to auto mode.
Unit operates at the lowest and the quietest fan speed.
Unit operates at the pre-set fan speed.
The unit will alternate between low and medium fan speed every 10 minutes.
Unit operates for a pre-determined time, then shuts off.
Turns negative ion generator on/off.
6