General Safety Information Hello there! “ • Please read all tips and warnings before using your Rabbit Air® Meet your brand new MinusA2®! • Use only as directed by the Owner’s Manual. you've been looking for. Be sure to get familiar with this to children.
Page 3
Operation Guidelines • Do not block the air intake or air outlet. servicing or cleaning the unit. steam. to install the proper outlet. Do not alter the plug in any way. with wet hands. • Keep the electrical cord away from heated surfaces at all times. rized service facility for examination and repair.
Meet your MinusA2 Back view Handle Front view Power Cord Mood Light Bracket Holder Air Outlet Air Intake (Around all sides of front panel) Control Panel/ Display Panel Remote control Particle Sensor Power Light Sensor will return to default. This feature is accessible through the remote only.
Control Panel Indicator Lights Turbo High Medium Silent Replace Filters Pollen Auto Filter Reset MOOD LIGHT on/off Sleep Light Sensor Air Quality Indicator Auto Mode Indicator Fan Speed Indicator Turbo Power Indicates the fan speed of Auto Turbo High High Press and hold the power button for two speed is Silent.
Page 6
Let’s Begin - Initial Set Up Meet the Filters 1. Remove the front panel by 3. Pull the tabs on the lifting from the bottom grasping the handles on front of the Pre-Filter Customized BioGS™ and pulling up. both sides and pulling to remove it.
Page 7
7. Pull out the Activated Finishing up! Carbon Filter and discard following order from back to front: plastic wrapping. Pre-Filter. 6. Remove the empty Customized Filter frame from the case. Locate the (See diagram on page 9). Customized Filter set aside from earlier and remove it from its plastic wrapping. 10.
Sleep Lighting will not override the fan Auto Press the Speed button to change the speed manually. Replace speed if the MinusA2 is operating in one of its manual speeds or Filters Pollen Mode. Turbo and Turbo.
Page 9
Mood Light Operation Changing the Sensitivity Level of the Sensors Mood Light Button preset at a standard sensitivity level as a default. The Mood Light turns on automatically when the air remote. Pollen Press and hold both the Speed and Auto Mode button for three seconds.
Cleaning the Unit Surface Cleaning and Maintenance on the air quality of the room. outlet air inlet Cleaning the Particle Sensor Clean particle sensor every three to six months. cleaner or soft brush. dust outlet Use a damp cloth to remove stubborn stains and dirty buildup if 1.
Page 11
Filter Cleaning and every 12 months Replacement Schedule* Filters Filter Life Cleanin Washable Pre-Filter Medium BioG Replacing the Customized Filter every 12 months Customized Charcoal-based Activated Carbon *Based on 24/7 operation Replacing your Filters 2. Take the new Customized Filter out of the plastic wrapping and place in the black frame. 3.
Page 12
Wall-Mounting your MinusA2 (Optional) Only use the approved Rabbit Air wall-mount kit to install the MinusA2 Air ceiling and eight inches of clearance on either side. • Do not pull on the power cord. • Make sure the hanger screws have been securely driven into studs.
Rabbit Air’s published guidelines; (h) to damage caused by service performed by anyone who is not a representative of Rabbit Air; (i) to a Rabbit Air Product that has been defects caused by normal wear and tear or otherwise due to the normal aging of the Rabbit Air Product;...
Please note that any repairs attempted or completed without Rabbit Air authorization will void this warranty. warranty; when warranty work is Rabbit Air reserves the right to change the method by which Rabbit Air may provide warranty ” associated taxes and charges.
Need help?
Do you have a question about the MinusA2 and is the answer not in the manual?
Questions and answers