Advertisement
Quick Start Guide
Let's Begin!
Front panel
Start Here
1. Remove the front
panel by lifting from the
bottom and pulling up.
4. Remove the HEPA Filter and
discard its plastic wrapping.
Complete these steps first before operating the unit.
Charcoal-Based
Pre-Filter
Activated Carbon
3. Pull out the Activated Carbon Filter
and discard its plastic wrapping.
24/7 customer care
BioGS 2.0 initial filter installation
BioGS HEPA
Filter
2. Pinch the two tabs on
top of the Pre-Filter to
remove it.
For questions, call 888.866.8862
Visit us at www.rabbitair.com
Filter
Next Page
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rabbit Air BioGS 2.0
Summary of Contents for Rabbit Air BioGS 2.0
- Page 1 BioGS 2.0 initial filter installation Quick Start Guide Let’s Begin! Complete these steps first before operating the unit. Charcoal-Based BioGS HEPA Front panel Pre-Filter Activated Carbon Filter Filter Start Here 1. Remove the front 2. Pinch the two tabs on...
- Page 2 filter replacement indicator will illuminate between 6 to 24 Generator on or off. This feature can be accessed months. Your filter cleaning indicator will through the remote. illuminate between every 4 to 18 weeks. ©2019 Rabbit Air. All rights reserved. BioGSQS1909...
Need help?
Do you have a question about the BioGS 2.0 and is the answer not in the manual?
Questions and answers