Beam IsatDock PRO User Manual page 28

IsatDock PRO Front Panel
Location Button
Mode
Redial
(1 second)
Up/Down
OR
Mute
(1 second)
Brightness
dual button
+
simultaneous
press
(1 second)
Speakerphone
press ON/OFF
28
Action
Out of Call:
Redial previous number dialed.
In a Call:
Increase/decrease volume on the internal hardware or privacy
handset.
Out of Call:
Increase/decrease volume of incoming ring tone on the
internal hardware speaker.
In a Call:
Mute the microphone (uplink) on the privacy handset
Out of Call:
Enter LED brightness change mode. Press UP and DOWN
arrows to vary intensity. Mode will automatically exit after 5
seconds after the last button press.
In a Call:
Terminate call if speakerphone mode is active
Activate speakerphone mode if Privacy Handset mode is active.
Out of Call:
Answer inbound call in speakerphone mode
LED/Sound
N/A
Audio will sound louder/quieter in privacy handset with each press.
A beep will sound indicating the increased/decreased ring tone volume .
LED turns RED - Muted
LED turns OFF - Not muted
LED flashing Yellow - RJ11/POTS in use
All LED's will change to WHITE and a single beep will sound when entering
brightness change mode.
A short double beep will sound when exiting change mode.
LED turns GREEN - Speakerphone mode active
LED turns OFF - Speakerphone mode not active