ResMed S8 Elite II User Manual page 36

Problem
The following
message is displayed
on the LCD after you
try to copy data to a
Data Card:
Card Error
Remove Card
The following
message is displayed
on the LCD after you
try to update the
settings using the
Data Card:
Settings Invalid
Remove Card
The following
message is displayed
on the LCD after you
try to update the
settings using the
Data Card:
Settings Error
Remove Card
The following
message is NOT
displayed on the LCD
after you try to update
the settings using the
Data Card:
Settings Success
Remove Card
Possible Cause
The Data Card is not inserted
correctly.
The card is not a ResScan Data
Card.
You may have removed the Data
Card before data was copied to
it.
The identification details on the
Data Card do not match the
details on your device.
There is a data error on the Data
Card.
The settings were not updated.
Solution
Ensure that the Data Card is
inserted with the arrow facing
up and pointing toward the
device.
Use a ResScan Data Card, as
specified in this manual.
Reinsert the Data Card and wait
for the
Copy Complete
Remove Card
message to appear on the LCD.
Contact your clinician
immediately.
Contact your clinician
immediately.
Contact your clinician
immediately.
Troubleshooting 30