iDect Link Plus Single User Manual page 31

7.4.3 De-register a Handset
This operation should only be necessary if one of your handsets becomes faulty
or lost and needs to be replaced.
You will need to enter the 4-digit system PIN (Default PIN is 0000) in order to
de-register a handset from the base station. A de-registered handset will have
the antenna flashing and REGISTER on the display.
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE HS.
3. Press <MENU/OK> and the display shows PIN?----
4. Enter the 4-digit system PIN.
5. Press <MENU/OK> and the first handset number is displayed.
6. Press <UP/DOWN> to step through the list of registered handsets, and
select the number of the handset you want to de-register.
7. Press <MENU/OK> to confirm, and the chosen handset will be de-registered.
7.4. 4 Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms),
MEDIUM ( 30 0ms) or LONG (600ms).
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select your desired flash time
(SHORT,MEDIUM,
to the right).
4. Press <MENU/OK> to confirm.
7.4. 5 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorised use. The default
system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
3. Press <MENU/OK> and
4. Enter the old system PIN.
5. Press <MENU/OK>
system PIN.
6. Press <MENU/OK> to display CONFIRM?------, and enter your new 4-digit
system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
again, entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press <MENU/OK> to confirm
LONG, with the current setting indicated by and asterisk
the display shows
to display NEW PIN?------, and enter your new 4-digit
29
PIN?------