Technical Details - iDect Link Plus Single User Manual

TECHNICAL DETAILS

Standard
Frequency range
Channel bandwidth
Operating range
Operating time
Temperature range
Electrical power
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
Port specification
The port (connec t ed to the mains power
respect to EN41003.
The port (connected to the telephone line) is a TNV port with
respect to EN41003.
CLEANING AND CARE
Do not clean any part of your phone system with benzene, thinners
or other solvent chemicals as this may cause permanent damage which is not
covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your phone system away from
strong sunlight, and
Every effort has been made to ensure high standards of reliability for your
phone system. However, if something does go wrong, please
not try to repair it yourself, but consult your supplier or the Helpline.
Digital Enhanced Cordless
Telecommunication (DECT)
1.88 to 1.9 GHz
(bandwidth = 20 MHz)
1.728 MHz
Up to 300m outdoors;
Standby: 100 hours,Talking: 10 hours
Battery charge time:15 hours
Operating 0 C to 40 C, Storage -20 C to 60 C
Base unit:
Ten Pao - S004LB0600045 / S004LV0600045
input 100-240VAC 50/60Hz 150mA,
output 6VDC 450mA
Charger unit:
Ten Pao - S004LB0600030 / S004LV0600030
input 100-240VAC 50/60Hz 150mA,
output 6VDC 300mA
Battery Information
GPI - VT40AAAHC 2 x1.2V AAA size 400mAh NiMH
BYD - H-AAA400A 2 x1.2V AAA size 400mAh NiMH
CORUN - AAAJ400 2 x 1.2 AAA Size 400mA NiMH
hot, humid conditions or
don't let it get wet.
Up to 50m indoors
h
supply) is a SELV port with
do