Console Service Mode - Schwinn 430i Elliptical Assembly Manual

The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, change
the machine type, control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours – for service
technician use only).
1. H old down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into the
Console Setup Mode.
Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen.
2. T he Console display shows the Date prompt with the current setting. To change, push the Increase/Decrease buttons to
adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active
value (month / day / year).
3. P ush OK to set.
4. T he Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust the
currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active value (hour /
minute / AM or PM).
5. P ush OK to set.
6. T he Console display shows the Units prompt with the current setting. To change, push OK to start the Units option. Push
the Increase/Decrease buttons to change between "MILES" (Imperial English units) and "KM" (metric units).
Note: I f the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8. T he Console display shows the Machine Type prompt with the current setting. Push the Increase/Decrease buttons to
change between "BIKE" and Elliptical ("ELIP").
9. Push OK to set.
10. T he Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons to
change between "ON" and "OFF".
11. Push OK to set.
12. T he Console display shows the TOTAL RUN HOURS for the machine.
13. For the next prompt, push the OK button.
14. T he Console display shows the Software Version prompt.
15. For the next prompt, push the OK button.
16 . T he Console will display the Power-Up Mode screen.
conSole Setup mode
37