Weider Pro 5000 User Manual page 13

20. Attach the Seat (19) to the Seat Frame (6) with
two M6 x 16mm Screws (60), an M6 x 77mm
Screw (68), and an M6 Washer (78).
Hook the Seat Frame (6) onto the Upright (3) at
the indicated location.
21. Attach the Bumper (49) to the Leg Lever (7) with
the M4 x 16mm Screw (70).
Apply grease to an M10 x 71mm Bolt (67). Attach
the Leg Lever (7) to the Seat Frame (6) with the
Bolt and an M10 Nylon Locknut (73). Do not
overtighten the Bolt; the Leg Lever must be
able to pivot easily.
22. Slide two Foam Pads (21) onto the Seat Frame
(6).
Slide a Pad Tube (20) through a hole in the Leg
Lever (7). Slide two Foam Pads (21) onto the Pad
Tube.
23. Make sure that all parts have been properly
tightened before the resistance system is
used.
20
19
6
78
68
21
Grease
67
73
7
49
22
21
21
20
13
3
60
6
70
6
7
21
21