Pro-Form Performance 1450 User Manual page 14

15. Attach a Wheel (92) to the Base (95) with a 3/8"
x 2 1/2" Bolt (20) and a 3/8" Nut (12). Do not
overtighten the Bolt; the Wheel must turn
freely.
attach the other Wheel (92) to the Base (95)
in the same way.
Lower the Frame (63) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 27 and 28).
15
92
14
63
12
95
20
92