Power Connections - Hach Portable Spectrophotometer DR 2800 User Manual

Installation

3.3 Power connections

1 Power supply with EU adapter plug installed
2 UK adapter plug
12
Install the correct adapter plug on the supplied external power
supply (Figure 1) by sliding the adapter on until it "clicks" into
position. Correctly mounted, both housing of power supply and plug
are in line. Plug the external power supply cord into the connector
on the back panel of the instrument, then plug the supply into a
power outlet (100–240 V~ / 50–60 Hz). Press the power switch on
the back of the instrument to initialize power
(Figure 2 on page 13).
Figure 1 Power adapter
3 USA adapter plug
4 AUS/China adapter plug