Advanced Operations
6.6.3 Analysis of time course data
96
•
Select Mark to mark the next data point collected. This mark is
not used by the instrument, but is available for the user and
may indicate a significant event, such as the addition of a
sample or other reagent. The mark is also shown in the table.
•
Select Stop to stop taking sample readings.
After the data are collected, the following manipulations can be
done on the graphic data:
The Time Course Program is complete, if
•
the sound is turned on, the instrument beeps when the
readings are done
•
the graph is shown fullsize,
•
the scaling of the x-axis occurs automatically,
•
the Cursor functions in the vertical navigation bar are
highlighted.