Section 4
Figure 8
Front Panel
4.2 Tips and Techniques for Programming the Instrument
Page 22
Tips and Techniques for Programming the Instrument
•
The instrument beeps each time a key is pressed.
•
After the ON button is presses, the display will show one of the following
messages: "Program Halted", "Program Running", "Program Complete",
or "Ready to Start".
•
The program status changes to Program Complete when sampling is
complete and there are no samples to be taken or the optional full bottle
shut-off is actuated.
•
When the program is stopped (an no changes to the program settings
were made while it was stopped), pressing the
prompt to resume the previously running program (an retain all logged
data) or Start From Beginning (and clear all logged data).
•
When programming the instrument, pressing the
to back up to the previous field.
key will
START PROGRAM
key causes the display
*
8544operations.fm