Connect To A Bluetooth Device - Motorola ET1 Quick Start Manual

Magnetic Stripe Card Reading
Use the Scanning/MSR Module to read magnetic stripe card.
Ensure that DataWedge is enabled and the cursor is in a text
1.
field.
Align the magnetic stripe on the card toward the display and
2.
swipe the card in either direction.
12

Connect to a Bluetooth Device

To enable Bluetooth:
Touch > Wireless & networks.
1.
Slide the Bluetooth switch to the ON position. The Bluetooth
2.
icon appears in the Status bar indicating that Bluetooth is
enabled.
Touch Bluetooth. The ET1 begins searching for discoverable
3.
Bluetooth devices in the area and lists them under
AVAILABLE DEVICES.
Scroll through the list and select a device. The Bluetooth
4.
pairing request dialog box appears.
Enter a PIN and touch OK, if required.
5.
Touch .
6.
Refer to the ET1 Enterprise Tablet User Guide for
NOTE
supported Bluetooth profiles.