Replacing The Speakers; Procedure; Postrequisites - Dell XPS 13 Owner's Manual

Replacing the Speakers

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the left speaker with the screw holes on the
palm-rest assembly.
2 Replace the screws that secure the left speaker to the palm-rest assembly.
3 Route the wireless-card cables through the routing guide on the left speaker.
4
Connect the left-speaker cable to the I/O board connector.
5 Connect the I/O cable to the I/O board and the system board.
6 Align the screw holes on the right speaker with the screw holes on the
palm-rest assembly.
7 Replace the screws that secure the right speaker to the palm-rest assembly.
8 Connect the right-speaker cable to the system board.
9 Route the wireless-card cables through the routing guide on the right speaker.

Postrequisites

1 Replace the battery. See "Replacing the Battery" on page 15.
2 Connect the power-light board cable to the system board. See "Replacing the
Power-Light Board" on page 13.
3 Replace the base cover. See "Replacing the Base Cover" on page 11.
18
| Replacing the Speakers