Removing The Base Cover; Procedure - Dell XPS 13 Owner's Manual

Removing the Base Cover

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1 Close the display and turn the computer over.
2 Using a Torx 5 screwdriver, remove the screws that secure the base cover to the
palm-rest assembly.
3 Starting from the back of the computer, pry up the base cover using your fingertips.
4 Lift the base cover off the palm-rest assembly.
1
1 base cover
10
| Removing the Base Cover
2
2 screws (10)