Exit; Boot Sequence - Dell XPS 13 Owner's Manual

Boot (Continued)
Secure Boot
Load Legacy Option Rom
Boot List Option

Exit

Exit Saving Changes
Exit discarding Changes
Load Setup Defaults
Discard Changes
Save Changes

Boot Sequence

This feature allows you to change the boot sequence for devices.
Boot Options
• Removable Drive — The computer attempts to boot from the removable drive. If no
operating system is on the drive, the computer generates an error message.
• Hard Drive — The computer attempts to boot from the primary hard drive. If no
operating system is on the drive, the computer generates an error message.
• USB Storage Device — Insert the memory device into a USB port and restart the
computer. When F12 Boot Options appears in the lower-right corner of the
screen, press <F12>. The BIOS detects the device and adds the USB flash option to
the boot menu.
NOTE: To boot to a USB device, the device must be bootable. To ensure that
your device is bootable, check the device documentation.
•
CD/DVD/CD-RW Drive — The computer attempts to boot from the optical drive. If
no disc is in the drive, or if the disc is not bootable, the computer generates an error
message.
56
| System Setup
Allows you to enable or disable secure
boot.
Allows you to enable or disable the option
to load a legacy rom
Allows you to set the boot sequence
order- UEFI or Legacy.
Allows you to save the changes made and
exit the BIOS.
Allows you to discard the changes made
and exit the BIOS.
Allows you to load the default BIOS
settings.
Discards the changes made to the BIOS.
Saves the changes made to the BIOS.