Table of Contents
Advertisement
Quick Links
Model Number: EMS1012UL
PowerVerter EMS Inverter/Charger - Reliable Mobile Power Source for Ambulance/EMS Vehicles
Description
Tripp Lite's EMS1012UL inverter with integrated charging system provides automatic, uninterruptible DC-to-AC power for critical on-board
equipment. Ideal for installation by ambulance/EMS vehicle manufacturers, dealer or EMS service for OEM, replacements and upgrades. Supplies
up to 1000 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a
shore power source, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 15/55 amp selectable
charging system. This unit can also function as a UPS system, responding to blackouts and brownouts with an uninterrupted transfer to
Battery-derived AC output. Convenient Anderson DC input quick connector on the unit with extra Anderson DC input connector included in the box
(user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive
electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime
with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger
settings for wet/gel battery types and selectable line to battery power transfer voltages. Includes AC input surge suppression. Includes hospital
grade plug and outlets with GFI (ground fault interrupter) protection. UL458/KKK-A-1822 listed.
Applications
Connect to an emergency vehicle's (ambulance, rescue squad or police B.A.T. mobiles) electrical system to run on-board diagnostic and
emergency equipment.
Package Includes
EMS1012UL inverter/charger
Instruction manual with warranty information
APSRM4 remote switch
2 Anderson DC connectors (1 on the unit and 1 included in the box)
Features
Functions as an emergency vehicle inverter, extended run UPS system or standalone power source
1000 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
UL458/KKK-A-1822 listed
Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
2 hospital-grade, GFI protected outlets; 3-ft. AC power cord with hospital grade plug; Two 175A rated Anderson DC input connectors (1 on
the unit and 1 included in the box) for 12V battery quick connection for use with user-supplied cables
Converts 12V DC to 120V AC
Frequency control for operating stability
Advanced 15/55 amp selectable, 3-stage battery charger and selector switch for gel or wet cell batteries
Highlights
UL458 / KKK-A-1822 listed
12V DC input, 120V AC output
2 hospital-grade GFI outlets; hospital-grade plug
2 Anderson DC connectors (1 on the unit and 1 included in the box) for quick
battery connection
1000 watts continuous output
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail:
saleshelp@tripplite.com
Advertisement
Table of Contents
Related Manuals for Tripp Lite EMS1012UL
Summary of Contents for Tripp Lite EMS1012UL
- Page 1 1000 watts continuous output Description Tripp Lite's EMS1012UL inverter with integrated charging system provides automatic, uninterruptible DC-to-AC power for critical on-board equipment. Ideal for installation by ambulance/EMS vehicle manufacturers, dealer or EMS service for OEM, replacements and upgrades. Supplies up to 1000 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a shore power source, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 15/55 amp selectable charging system.
-
Page 2: Specifications
Advanced 15/55 amp selectable, 3-stage battery charger and selector switch for gel or wet cell batteries Switch allows user to select between off, auto-invert and charge-only settings 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low) Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing) - Page 3 Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with included External switch for wired remote control of APS unit APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
- Page 4 Copyright © 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Need help?
Do you have a question about the EMS1012UL and is the answer not in the manual?
Questions and answers