Tripp Lite APSINT Series Owner's Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. Inverter
  5. APSINT Series
  6. Owner's manual
Tripp Lite APSINT Series Owner's Manual

Tripp Lite APSINT Series Owner's Manual

Apsx & apsint series dc-to-ac inverter/chargers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
APSX & APSINT Series
DC-to-AC Inverter/Chargers
Invert:
Charge:
Reliable Emergency Backup Power
Congratulations! You've purchased the most advanced, feature-rich Inverter/Charger designed as an alternative energy source during utility
power failures. Tripp Lite APS Inverter/Chargers keep your equipment constantly up and productive through all utility power problems (blackouts,
brownouts and high voltages) by inverting DC power from user-supplied batteries into AC power. Built-in surge suppression provides an additional
level of equipment protection. When utility power is present, APS Inverter/Chargers automatically pass through power to your equipment while
simultaneously recharging your connected battery bank. APS Inverter/Chargers are the quiet alternative to gas generators during emergency
backup applications—with no fumes, fuel or noise to deal with! You get AC electricity anywhere and anytime you need it.
Better for Your Equipment
Better for Your Batteries
Better for You
Safety
Warranty
Feature Identification
Operation
Configuration
Battery Selection
Mounting
Owner's Manual
PowerVerter
Input
12, 24 or 36 VDC
230V, 50 Hz. AC
2
2
3
4
5-6
7
8
* Available on all models except 750 and 1250 models. ** Inverter/Chargers are moisture-resistant, not waterproof.
Copyright © 2006. PowerVerter
®
Output
230V, 50 Hz. AC
12, 24 or 36 VDC
Premium Protection Levels
• Built-In Isobar Surge Protection
• Automatic Overload Protection
Ideal Output for All Loads (including computers)
• Frequency-Controlled Output
• Fast Load Switching
• Balanced Load Sharing
Faster Battery Recharge
• High-Amp, 3-Stage Battery Charger (adjustable)
Critical Battery Protection
• Battery Charge Conserver (Load Sense)*
• High-Efficiency DC-to-AC Inversion
Simple, Maintenance-Free Operation
• Multi-Function Lights & Switches
• Dead Battery Startup
• Moisture-Resistant Construction**
Contents
Battery Connection
AC Input/Output Connection
Service/Maintenance/Troubleshooting
Español
Français
Pyññêèé
®
is a registered trademark of Tripp Lite. All rights reserved.
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1212
www.tripplite.com
9
10
11
12
23
34

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APSINT Series and is the answer not in the manual?

Questions and answers

Related Manuals for Tripp Lite APSINT Series

Summary of Contents for Tripp Lite APSINT Series

  • Page 1 Congratulations! You’ve purchased the most advanced, feature-rich Inverter/Charger designed as an alternative energy source during utility power failures. Tripp Lite APS Inverter/Chargers keep your equipment constantly up and productive through all utility power problems (blackouts, brownouts and high voltages) by inverting DC power from user-supplied batteries into AC power. Built-in surge suppression provides an additional level of equipment protection.

  • Page 2: Important Safety Instructions

    Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.

  • Page 3: Feature Identification

    AC power. It also enables the Inverter/Charger to be remotely monitored and controlled with an optional remote module (Tripp Lite model APSRM4, sold separately). The “CHARGE ONLY” setting allows your batter- ies to return to full charge faster by turning the inverter off which halts battery discharging.

  • Page 4: Operation

    ONLY” as desired. If unit fails to reset, remove more load or allow unit to cool further and retry. Use an optional remote control mod- ule (Tripp Lite model APSRM4, sold separately) to reset unit due to overload only. Indicator Lights...

  • Page 5: Configuration

    Configuration Set Configuration DIP Switches Using a small tool, set the Configuration DIP Switches (located on the front panel of your unit, see diagram) to optimize Inverter/Charger operation depending on your application. Group B Dip Switches Group A DIP Switches Select Battery Type—All Models (REQUIRED) CAUTION: The Battery Type DIP Switch setting must...
  • Page 6 Connect Remote Control—Optional All models feature an 8-conductor telephone style receptacle on the front panel for use with an optional remote control module (Tripp Lite model APSRM4, sold separately). The remote module allows the Inverter/Charger to be mounted in a compartment or cabinet out of sight, while operated conveniently from a remote location.

  • Page 7: Battery Selection

    Select a battery or system of batteries that will provide your Inverter/Charger with proper DC voltage and an adequate amp-hour capacity to power your application. Even though Tripp Lite Inverter/Chargers are highly-efficient at DC-to-AC inversion, their rated output capacities are limited by the total amp-hour capacity of connected batteries plus the output of an alternator when one is used.

  • Page 8: Mounting

    Inverter/Charger and connected systems. Tripp Lite manufactures a variety of different Inverter/Chargers with a variety of different mounting options for use in vehicular or non-vehicular applications. Tripp Lite recommends permanent mounting of your Inverter/Charger in any of the configurations illustrated below. User must supply mounting hardware and is responsible for determining if the hardware and mounting surface are suitable to support the weight of the Inverter/Charger.

  • Page 9: Battery Connection

    Inverter/Charger is connected to one or more dedicated auxiliary (house) batteries which are isolated from the drive system to prevent possible draining of the main battery. Contact Tripp Lite technical support for assistance with additional parallel, series or series/parallel connections. Optional connection for Vehicular applications only.

  • Page 10: Ac Input/Output Connection

    GROUND NEUTRAL • OverPower Tripp Lite Inverter/Chargers deliver up to 150% of their name plate rated wattage for up to 1 hour,* providing plenty of reserve power to reliably support tools and equipment longer. * Actual duration depends on battery age, battery charge level and ambient temperature.

  • Page 11: Maintenance

    Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.
  • Page 12 1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 200608120 93-2608_EN...

This manual is also suitable for:

Apsx seriesPowerverter apsint seriesPowerverter apsx series

Table of Contents