Parameter Names; The Panel; Channel Select - Clavia Nord Drum 2 User Manual

6 | Nord drum 2 user maNual os v2.1x

Parameter names

Please note: Some parameters on the Nord
Drum 2 panel have had their names changed
since the release of version 2 .1 . This manual
will use the new names in the text and illus-
trations but the old names will be included in
(round brackets) .
Old name
Dyn Filter
Atk/Rate
Env Mode
Type/Dyn (Noise)
Repeat
Dyn Timb
Hi Decay
Type/Dyn (Tone)
Trig (Button)
Repeat Tempo
New name
Filt Env
Attack/Rate
Atk Mode
Dec Lo
Echo
Timb Env
Timb Dec
Dec Lo
Trig/Tap
Echo BPM

The Panel

The buttons, the LED display and the Dial are
used when you select a program and when
you edit the sounds in the Nord Drum 2 .

Channel Select

There are six channels, each channel repre-
sents one sound . Press the Channel Select
buttons repeatedly to change and select
the channel to be triggered with the Trig/Tap
button on the panel and/or to be edited . The
red Focus LEDs will indicate which channel is
selected and will stay lit when you are editing
a sound .
You can use pads to quickly select the
channel to edit, if no channel has been
previously selected with a Channel Select
button. If a Channel Select button has
been used to manually select a channel,
press the Program button once, strike
a pad to select the channel and then a
parameter button to return to editing that
channel.