Filt Res; Attack/Rate (Atk/Rate); Atk Mode (Env Mode) - Clavia Nord Drum 2 User Manual

16 | Nord drum 2 user maNual os v2.1x

Filt Res

Resonance is used to emphasize frequencies
around the filter cutoff frequency . This can be
perceived as making the sound thinner or a
bit "nasal" .
Range: 0 - 20
Low pass filter w resonance
gain(dB)
0

Attack/Rate (Atk/Rate)

The Attack setting defines
how much time it will take for
the noise level to go from zero
to the maximum level . If the Attack time is
set to "0", the noise will instantly reach its full
level . If the attack time is higher it will take a
longer time .
If the Atk Mode parameter is set to any of the
LFO modes, this parameter set the rate of
the LFO .
Range: 0 - 50
f c
FILT TYPE =
FILT FREQ =
FILT RES =
24 dB/oct
18

Atk Mode (Env Mode)

The noise envelope (attack, decay) can be
used in a traditional, one shot behavior (Ad) .
lter env/
noise amp



0
attack time
In addition, the envelope can be set to a
freq
cyclic behavior and will act as a modulating
LFO with sawtooth, inverted sawtooth and
triangle waveforms (LFO1 to LFO3 ) during
the Noise decay .
lter env/
noise amp
0
AD mode
ATK MODE =
ATTACK = 
 
DECAY =
decay time
LFO mode

ATK MODE =
RATE = 
 
DECAY =
time
decay time

time