Timbre; Timb Dec (Hi Decay); Punch; Decay - Clavia Nord Drum 2 User Manual

M Timb Env is not available if the A 1 (sine)
waveform is selected.

Timbre

The initial timbre is set with this parameter .
A value of 0 produces less harmonics, and
would allow the Timb Env amount, Timb Dec
and striking force to have a greater influence
on the Wave . A value of 50 will produce the
maximum harmonic content, leaving little to
be controlled by the Timb Env and Timb Dec
parameters .
The analog style waveforms are low pass
filtered, the other Waves will have their har-
monic content changed .
Timbre controls the FM amount if a FM Wave
is selected .
M Timbre is not available if the A 1 (sine)
waveform are selected.
Range: 0 - 50

Timb Dec (Hi Decay)

Timb Decay is the time of the
timbre envelope decay .
M If the Timb Env parameter is set to 0,
changing this parameter will have no
effect.
M Timb Dec is not available if the A 1 (sine)
waveform is selected.
Timbre control
Range: 0 - 50
timbre
TIMB DEC =
50
max velocity
25
low velocity
0
timbre decay time


TIMB ENV =

TIMBRE =
time
Chapter 3 refereNCe

Punch

Punch can add a short, velocity controlled
attack portion to the Wave . L1 to L3 indicates
three different levels of this attack .
PUP
The " " setting will shift the pitch of the
very first cycle or period in the Wave one
octave up, a great way to get a initial kick in a
bass drum sound . The "
the pitch of the first period one octave down .
Range: OFF, L1, L2, L3, PUP, Pdn

Decay

The decay parameter sets
the length of the Tone and
the curve of the Tone decay . The higher the
value, the longer the sound .
Hold Shift and turn the Dial to quickly
choose between the exponential or the
linear curve.
Range: 1-50e, 1-50L
Pdn
" setting will shift
| 19