Swann 16CH User Manual page 26

4.10 ADVANCE MENU ___REMOTE
4.10 ADVANCE MENU ___REMOTE
Move the cursor to "REMOTE", and press "ENTER", then the screen will show the
following options.
Take 16CH as an example
Take 16CH as an example
TITLE DEVICE
01 PTZ
02 CAMERA
03 CAMERA
04 CAMERA
05 CAMERA
06 CAMERA
07 CAMERA
08 CAMERA
PREV NEXT
1) TITLE:
Title of each camera.
2) DEVICE:
Select to control normal camera or PTZ camera for each channel.
3) ID:
Set the ID number (0 ~ 255) as same as the ID of each device.
4) PROTOCOL:
Select NORMAL (our protocol) or PELCO-D protocol.
5) RATE:
Set the baud rate of each channel (2400, 4800, 9600, 19200, 57600).
PTZ Control:
PTZ Control:
1) Device: Our own brand PTZ / Pelco-D protocol PTZ
Device
2) Connection Connection: Refer to rear panel / Refer to PIN configuration
3) Control Mode: Refer to front panel / Refer to IR remote control manual
Control Mode
4) Detailed Instructions: Refer to PTZ manual
Detailed Instructions
REMOTE REMOTE
ID PROTOCOL
001 P - D
002 NORMAL
003 NORMAL
004 NORMAL
005 NORMAL
006 NORMAL
007 NORMAL
008 NORMAL
23
RATE
02400
02400
02400
02400
02400
02400
02400
02400