Swann 16CH User Manual page 30

16CH (D) / 8CH (D) / 4CH (D)
Move the cursor to the "BACKUP", and press "ENTER", then the screen will show the
following options.
USB BACKUP
DISK BACKUP
Select "DISK BACKUP" and then press "Enter".
START TIME
END TIME
AVAILABLE SIZE
CHANNEL
HDD NUM
BACKUP TO DISK
1) Press "＋" and "－" buttons to open the DVD / CD WRITER.
Put the DISK into DVD / CD WRITER, and press "＋" and "－" buttons again to close.
(NOTE: Use DVD
(NOTE: Use DVD
2) Go to "DISK BACKUP" menu and set the start time, end time, channel and HDD number.
3) After setting up the backup information,
move the cursor to "START", and press "ENTER".
While the files are backup to DISK, users will see the backup completed percentage on
the screen.
4) After backup files to DISK, "DISK BURN FINISH" will prompt on the screen.
Press "＋" and "－" to take out the DISK from DVD / CD WRITER.
5) Put DISK into the DVD / CD -ROM of PC.
(O/S system: Windows XP, and Windows2000).
And then double click the file
Play the backup file at PC Side.
DVD_R_01
BACKUP
BACKUP
DISK BACKUP
DISK BACKUP
- R DISK only)
- R DISK only)
Convert the file
2005-11-30 15 : 30 : 00
2005-12-01 16 : 00 : 00
4083 MB
01
MASTER
START
27