TABLE 3: MECHANICAL SPECIFICATIONS
Physical Dimensions
Approximate Weight
Mounting holes (6)
5.3.2
C
E
LECTRICAL
For the locations of the connectors see Figure 1 at page 11 & Figure 3 at page 14. Electrical
interconnections to the system consist of prime power (J5) and external connections for discrete
interface (J3). Use the provided mating connectors included in the packing kit.
• Prime power is applied to (J5) connector located on the front panel of the SSPA via the
connector provided.
• Verify that AC power source is turned OFF.
• Connect the AC line connector to the AC source (90-132 or 180-265 VAC, 47-63 Hz). Refer
to Figure 3 at page 14 and TABLE 2 at page 15 & TABLE 4 at page 17 for pins
assignments and for input voltage level.
WARNING: Proper grounding of the AC power outlet is necessary for personnel and
equipment safety.
•
Discrete interface connections are made via (J3) connector. Use the connector provided for
complete monitoring and control of the power amplifier.
Power Requirements
Power Consumption
See Figure 1: Product Outline at page 11
30 lbs (14 kg)
0.40" (10 mm) dia. See Figure 1: Product Outline at page 11
ONNECTIONS
TABLE 4: POWER REQUIREMENTS
90-132 or 180-265 VAC (auto-ranging),
47-63 Hz, single phase
700 W, typical
AWSA-K50-CHE
Page 17