Table of Contents
Advertisement
2.4 SPECIFICATIONS
The SSPA specified herein is capable of meeting or exceeding the performance specifications
listed in the following table over frequency range, operating temperature and line voltage
variation unless otherwise specified. The SSPA will meet all RF performance specifications
within thirty minutes of application of prime power.
TABLE 1: ELECTRICAL SPECIFICATIONS (each unit)
Frequency Range
Power Output (P1dB)
Gain @ rated power
Gain Flatness (at room temperature)
Gain Variation
Gain Stability over 24 hours
Variable output attenuation
Accuracy of attenuation setting
Input Return Loss (Power on)
Output Return Loss (Power off)
Noise Figure @ maximum gain
Spurious at rated power
Harmonics at rated power
AM/PM Conversion at rated power
Third Order Intermodulation
(Two equal tones 5 MHz apart)
Group Delay
Residual AM
(F* = Frequency in kHz)
Phase Noise
14.000 - 14.500 GHz
+ 49 dBm, min
60 dB, min
2.0 dB p-p, max, over 500 MHz
0.6 dB, max, over 40 MHz
± 0.50 dB, max (0°C to +25°C)
± 1.50 dB, max (0°C to +50°C)
± 0.25 dB, max @ 25°C ambient
18 dB, min
± 1.0 dB, over frequency and temperature range
18 dB, max
20 dB, max
10 dB, max
- 65 dBc, max
- 65 dBc, max
3°/dB, typ.
- 33 dBc, max. @ 7 dB back-off total power
- 25 dBc, max. @ 3 dB back-off total power
Linear
0.02 ns/MHz, max
Parabolic
0.003 ns/MHz
Ripple
1 ns p-p, typical
- 45 dBc
- 20 (1+ log F*) dBc
- 80 dBc
Meets IESS-308/309
ARMA-K100-CRM
2
, max
(0 - 10 kHz)
(10 kHz - 500 kHz)
(500 kHz - 1 MHz)
16
Advertisement
Table of Contents
