Advantech AWSA-K50-CHE Installation And Operating Manual page 11

ELECTRICAL SPECIFICATIONS (continued)
VSWR Input/Output
RF Input Connector
Waveguide Flange Output Connector
Spurious Outputs In-band
Spurious out-of-band
Harmonics
RF Output Sample Port (J4)
Type-N Female, with protective cap/chain
CAUTION: Do not exceed –25 dBm input level. For input levels more than –25 dBm the
unit will be overdriven, will go in saturation, and will be irreversible damaged. Note that
damage caused by overdrive will void the warranty.
1.3:1, max (RL = 17.7 dB)
Unconditionally stable over the frequency and ambient
operating temperature range, with no damage to the SSPA
under any load or source condition
N-Type Female
WR-75G, supplied with waterproof gasket
- 60 dBc, max, 13.750 – 14.500 GHz
Referenced to P1dB CP
-60 dBc max., 3.625 – 4.200 GHz (C-Band)
-60 dBc max., 4.500 – 4.800 GHz (InSat C-Band)
-60 dBc, max, 5.850-6.425 GHz (C-Band)
-60 dBc, max, 6.725-7.025 GHz (InSat C-Band)
-60 dBc max., 10.950 – 12.750 GHz (Ku-Band)
Referenced to P1dB CP
-50 dBc, max, referenced to rated output power signal level
- 30 dBc (± 2 dB) coupling factor
AWSA-K50-CHE
Page 10