Audio Settings - ATCOM AT-610 User Manual

AT-610 User Manual
call with 3 digital and the first digital is 4 , will be refused.
DOT (.) means matching any arbitrary number digit. for example, any
number with prefix 6 will be forbidden to dialed out. Any digital call with a
certain head number, For example 6. means any incoming number with the 6 as
the first number will be refused.
if user wants to allow a number or a series of number incoming, he may
add the number(s) to the list as the white list rule. the configuration rule is
–number, for the settings as below.
-7049 means any incoming number is forbidden except 7049
Note: End with DOT (.) when set up the white list
Limit List:
Set Add/Delete Limit List. Please input the prefix of those phone numbers
which you forbid the phone to dial out. For example, if you want to forbid those
phones of 001 as prefix to be dialed out, you need input 001 in the blank of limit
list, and then you cannot dial out any phone number whose prefix is 001. x and .
are wildcard. x means matching any single digit. for example, 4xxx expresses
any number with prefix 4 which length is 4 will be forbidden to dialed out .
Means matching any arbitrary number digit. For example, 6. expresses any
number with prefix 6 will be forbidden to dialed out.

Audio Settings

4.5.
First Codec：The fist preferential DSP codec:G.711A/u、G722、G.723、G.729
Second Codec：The second preferential DSP codec:G.711A/u、G722、G.723、
G.729
Third Codec：The third preferential DSP codec:G.711A/u、G722、G.723、G.729
Forth Codec: The Forth preferential DSP codec:G.711A/u、G722、G.723、G.729
ATCOM TECHNOLOGY CO., LIMITED