Beltpack Transmitter
B1
B2
B3
B4
B5
SW40-T
B6
B7
B8
B9
Controls
Antenna (replaceable)
B1
LCD screen
B2
On-off/mute switch
B3
Press and hold to turn on or off. Press and release to mute or un-mute.
Set switch
B4
Battery cover
B5
IR port - Receives infrared beam to synchronize frequencies.
B6
When using multiple systems, only one transmitter IR port should be exposed at a time.
Gain adjustment switch
B7
Mute indicator - Red: mute on
B8
TA4-F microphone input jack
B9
Wearing the Beltpack Transmitter
Clip the transmitter to a belt until the belt is pressed
against the base of the clip.
Changing Batteries
Expected life for an Alkaline battery is approximately 8 hours.
Change batteries when the battery bar in LCD display is empty, as shown below:
Programming the Beltpack Transmitter
1. With the power on, press and hold the set button until the GROUP and CHANNEL
displays begin to alternate.
2. To change the group setting, release the set button while GROUP is flashing. While
GROUP is flashing, pressing set increases the group setting by one.
3. Press power button to switch between GROUP and CHANNEL settings.
Remember to press power and set button to confirm when the setting is completed.
Press the power and set buttons simultaneously to lock or unlock the transmitter settings.
When locked, the current settings cannot be changed manually.
Indicates charge remaining in transmitter batteries.
7
Sabine SWM4000 Smart Spectrum
Wireless
®
LIT-SWM4000-OG-EN-100205.indd