Form Tear Off
The Form Tear Off feature allows you to advance continuous forms to
the stacker for tear off.
The printer default for Forms Tear Off is Off. To use this feature, you
must enter the Function Settings Menu and turn it on.
To Turn On Forms Tear Off:
1. Press SEL.
The printer goes off-line.
2. Simultaneously press SHIFT and MODE to enter the Function
Settings Menu.
PRINTER CONTROL
3. Press and hold SHIFT, then press FF repeatedly until FRONT
displays.
FEED
4. Press FF repeatedly until FORM TEAR-OFF displays.
displays.
Microline 8480FB User's Guide
Form Tear Off • 60