Table of Contents
Advertisement
Running Tests
Note When the printer is running a test, it always uses a left
margin of 5.1 mm (0.2-inch).
Rolling ASCII Test
This test provides a one-page continuous printout of the ASCII
characters.
1. Turn off the printer.
2. Simultaneously press and hold the LF and FF switches while
turning on the printer.
3. Load a sheet of paper on the platform.
4. The Rolling ASCII test will run and the sheet will eject.
Font Sample Test
This test provides a sample of each of the available fonts in the
printer.
Note The Font Sample test takes two letter-size sheets.
1. Turn off the printer.
2. Simultaneously press and hold the MODE and LF switches while
turning on the printer.
3. Load a sheet of paper on the platform.
4. The Font Sample test will run and the sheet will eject.
5. Remove the first printed sheet from the platform and load
another sheet.
6. The test finishes printing and the sheet ejects.
Hex Dump Mode
When the printer is in the Hex Dump Mode, all data received,
including text and printer commands, will be printed in both
hexadecimal and ASCII format.
Note In the ASCII format, all non-printable characters will be
represented by a period.
Microline 8480FB User's Guide
Running Tests • 62
Hide quick links:
Advertisement
Table of Contents
