Wegener DTV701 User Manual page 28

3. Channel Selection
Press the ENT key and then the
number. Press ENT to confirm the selection or ESC to cancel changes.
Press the
Press the ESC key to go to Input Setup (2).
4. RF Standard Selection
Press the ENT key and then the
CATV. Press ENT to confirm the selection or ESC to cancel changes.
Press the
Press the
Press the ESC key to go to Input Setup (2)
5. MPEG Selection
Press the ENT key and then the
Press ENT to confirm the selection or ESC to cancel a change.
Press the
Press the ESC key to go to Input Setup (2).
Choosing ALL prevents changes to program numbers or stream content. The
received MPEG stream is passed through to the output unchanged. Choosing
SELECT allows the user to change program and channel numbers (and
channel short name) as well as to exclude program streams from the output.
800015-01 Rev. D
CHANNEL:
20
key to go to the RF Standard screen (4).
RF Standard:
BROADCAST
key to go to MPEG Select (5)
key to go to Channel Selection (3)
MPEG Select:
SELECT
key to go to RF Standard (4).
28
DTV 701 User's Manual
or key to change the selected channel
or key to select BROADCAST or
or key to select ALL or SELECT.
wegener.com