Dtv701 Controls And Indicators; Liquid-Crystal Display(Lcd) - Wegener DTV701 User Manual

3.3 DTV701 Controls and Indicators

There are three major parts of your DTV701's front-panel controls and indica-
tors: the liquid-crystal display (LCD), the six push buttons, and the eight LED
indicators. Essentially all control available through the terminal is also avail-
able via the front panel (shown below in Figure 3.4).
Liquid-
The DTV701's 2x20-character LCD indicates unit status and prompts for and
crystal reflects user input. Here, you will see your DTV701's "home screen" which
Display(LCD) alternates between showing the channel number and the RF downlink fre-
quency on the left and continuously shows the signal-to-noise ratio in the
lower right. No matter which LCD screen is currently shown, pressing the ESC
button repeatedly returns the display to the home screen. From this home
screen, press the ENT button to display the unit's serial number and the appli-
cation software version number. Using the adjacent push buttons, you can nav-
igate the DTV701's various screens and edit input fields (see section 3.4
Front-panel Operation on page 27).
CHAN:
BDCAST
The default LCD screen is this "home screen". No matter where a user may be
in the LCD screen hierarchy, if no front-panel key press is made for more than
five minutes, then the LCD menu reverts to the "home screen".
800015-01 Rev. D
Figure 3.4 DTV701 Front Panel
20
SNR:32.1
24
DTV 701 User's Manual
551.00MHz
8VSB SNR:32.1
wegener.com