Reset The Radio; Specifications; Headphone Socket; Aux In Socket - Sangean HDR-1 User Manual

RESET the radio

If the radio fails to operate correctly i.e. display can't change
according to the operation. Unplug the AC power cord and wait for
5 seconds then re-plug. This is to reset the radio for troubleshooting
the possible CPU power down .After RESET the radio, radio will be
back to Standby mode ( Power off ).

Headphone socket

A 3.5 mm Headphone Socket located on the rear of the radio is
provided for use with either headphones or an earpiece.
Inserting a plug automatically mutes the internal speaker.

Aux in socket

1. Connect a stereo or mono audio source ( i.e. iPod, MP3 or
CD player ) to the Aux IN socket on the rear of the radio.
2. Switch the band to AUX IN.
3. Select required volume level by pressing Volume Control on the
remote control or rotary the Power/Control knob on the radio.
4. Select required audio equalizer by pressing EQ button.
23
20061122_HDR-1_381QB0SA-A_GB.p65

Specifications

Power Requirement:
Mains AC 120 volts 60 Hz only
Battery ( remote control ) 3.0V CR 2025 button type
Frequency Coverage:
FM 87.50 – 108 MHz
AM 520 – 1710 kHz
HD FM 87.50 – 108 MHz
HD AM 520 – 1710 kHz
Circuit Features:
Loudspeaker 63 mm x 2
Output Power 5 Watts x 2
Headphone socket 3.5 mm dia.
Aux In socket 3.5 mm dia
Aerial System:
FM Telescopic aerial
AM Loop antenna
Dimensions ( W x H x D ): 290x110x182 mm
Weight: approx. 3 kgs.
2006/11/22, ¤W¤È 09:14
20