Reset The Radio; Mute The Radio; Power Failure - Sangean WR-2 Operating Instructions Manual

2 band radio receiver

Hide thumbs Also See for WR-2:

Table of Contents

RESET the radio

If your radio fails to operate correctly or some digits on the display

are missing or incomplete, carry out the following procedure.

1. Switch off the radio.

2. With the aid of a suitable implement (the end of a paper clip),

press the RESET button located on the underside of your radio

for at least 2 seconds , this will reset the microprocessor, clock

time and clear all stations stored in the preset memory .

Press MUTE button again or power on/off or volume control to re-

lease the muting.

The clock will continue to run 6 minutes during power failure while

preset stations can last for approx. an hour. After that, you should

reset the radio and preset stations.

Table of Contents

Show Quick Links

Table of Contents