NEC N8100-1422F User Manual page 291

Installation
Follow the procedure as described below to install 3.5-inch hard disk drives.
1.
Open the front mask.
2.
Remove the dummy tray.
3.
Install the hard disk drive in the HDD cage.
Fully open the lever of the hard disk drive and insert the drive into the HDD cage until it
hits the depth of HDD cage.
After the hard disk drive is fully inserted into the cage, close the lever to fix the drive. (A
click occurs when it is locked.)
IMPORTANT:
Consult with your service representative for available hard disk drive.
1
2
Use the hard disk drive that is authorized by NEC.
Upgrading Your Server 9-11