Table of Contents
Advertisement
8-30 Troubleshooting
A hard disk drive fails:
Contact your service representative.
Cannot enter Hibernation.
→ If you use LSI Embedded MegaRAID, system may not enter hibernation with
heavy I/O.
Cannot enter standby.
→ If you use LSI Embedded MegaRAID, system may not enter standby with
heavy I/O.
Physical device is not correctly displayed on Universal RAID Utility
→ If you use LSI Embedded MegaRAID, a part of information on a physical
device is not correctly displayed on Universal RAID Utility.
It is no problem.
Advertisement
Table of Contents
Troubleshooting
